Dynaco M2 Stainless Steel high speed door
The Dynaco M2 STAINLESS STEEL Door is designed for interior and exterior environments such as agriculture or food, or for similar industries where a high degree of hygiene, frequent cleaning, excellent sealing and/or corrosive conditions are present.
-
Colours
White
Blue
Grey
Yellow
Black
Orange
Red
GreenStandard Dimensions
18' W x 18' HOpening Speed
96 in/sClosing Speed
48 in/sOperating Type
Gear driven, push-pull movementSide Guide
Made of structural channels or 3 1/8" x 1 5/8" x 0.078" in stainless steel.Inner Side Guide
Polyethylene (PE-UHMW 1000); outer section 7/8” x 1 9/16”, on springs.Side Guide Covers
Stainless SteelDrum
In stainless steel, diameter 4" x 0.078", shafts in stainless steel. Shafts and flanges are welded interior and exterior of the drum.Door Curtain
Reinforced PVC (27 oz/sq.yd). Available in different colors and provided with stainless steel side sealing zippers (Section 5/8” x 1/2”); soft bottom edge design.Motor
Without brake, with 4 poles, controlled by a variable speed drive. Power: 1 HP for a door surface up to 25 sq.yds; 2 HP (larger surface). Protection degree NEMA 4.Motor Cover
Stainless SteelGearbox
Size 50 for a motor of 1 HP and gear reduction ratio 1/7; size 63 for 2 HP.Detectors
An infrared photocell installed inside the side guide and detecting the presence of a pedestrian or a vehicle. Upon activation, it opens the door immediately and keeps it open as long as the presence is detected. Height of the photocell: 12” from the floor. (Optional: up to maximum 24” from the floor). A bottom edge detector opens the door when it hits an obstacle during the closing cycle. This detector is positioned at the bottom part of the curtain.Power Supply
Standard: single phase 208-230 VAC, three phase 208-230 VAC, three phase 460 VAC. Optional: three phase 575 VAC. Frequency: 50-60 Hz. Fuses to be provided by the customer: 25 A for a motor of 2 HP.Space Requirements
All indicated dimensions are net: the additional space necessary for mounting and maintenance has to be taken into account. Reduced dimensions upon request.- Designed for interior or exterior environment where a high degree of hygiene and frequent cleaning are required, and where exceptional sealing is needed or corrosive environments exist.
- Resists winds up to 95 MPH.
- Maximum standard dimensions 18' x 18'.
- Operating up to 96"/sec.
- Curtain made of reinforced PVC vinyl.
- Infrared photocell in side guides.
- Soft bottom edge.
- Pneumatic bottom edge detector. Stainless steel doors suit the agricultural, food, hygienically sensitive, wash down areas or where corrosive environments exist.
- Agricultural
- Food Industry
- Hygienically Sensitive Applications
- Wash Down Areas
- Corrosive Environments
Colours
Colours
White
Blue
Grey
Yellow
Black
Orange
Red
GreenFeatures
Standard Dimensions
18' W x 18' HOpening Speed
96 in/sClosing Speed
48 in/sOperating Type
Gear driven, push-pull movementSide Guide
Made of structural channels or 3 1/8" x 1 5/8" x 0.078" in stainless steel.Inner Side Guide
Polyethylene (PE-UHMW 1000); outer section 7/8” x 1 9/16”, on springs.Side Guide Covers
Stainless SteelDrum
In stainless steel, diameter 4" x 0.078", shafts in stainless steel. Shafts and flanges are welded interior and exterior of the drum.Door Curtain
Reinforced PVC (27 oz/sq.yd). Available in different colors and provided with stainless steel side sealing zippers (Section 5/8” x 1/2”); soft bottom edge design.Motor
Without brake, with 4 poles, controlled by a variable speed drive. Power: 1 HP for a door surface up to 25 sq.yds; 2 HP (larger surface). Protection degree NEMA 4.Motor Cover
Stainless SteelSpecifications
Gearbox
Size 50 for a motor of 1 HP and gear reduction ratio 1/7; size 63 for 2 HP.Detectors
An infrared photocell installed inside the side guide and detecting the presence of a pedestrian or a vehicle. Upon activation, it opens the door immediately and keeps it open as long as the presence is detected. Height of the photocell: 12” from the floor. (Optional: up to maximum 24” from the floor). A bottom edge detector opens the door when it hits an obstacle during the closing cycle. This detector is positioned at the bottom part of the curtain.Power Supply
Standard: single phase 208-230 VAC, three phase 208-230 VAC, three phase 460 VAC. Optional: three phase 575 VAC. Frequency: 50-60 Hz. Fuses to be provided by the customer: 25 A for a motor of 2 HP.Space Requirements
All indicated dimensions are net: the additional space necessary for mounting and maintenance has to be taken into account. Reduced dimensions upon request.Other Details
- Designed for interior or exterior environment where a high degree of hygiene and frequent cleaning are required, and where exceptional sealing is needed or corrosive environments exist.
- Resists winds up to 95 MPH.
- Maximum standard dimensions 18' x 18'.
- Operating up to 96"/sec.
- Curtain made of reinforced PVC vinyl.
- Infrared photocell in side guides.
- Soft bottom edge.
- Pneumatic bottom edge detector. Stainless steel doors suit the agricultural, food, hygienically sensitive, wash down areas or where corrosive environments exist.
Applications
- Agricultural
- Food Industry
- Hygienically Sensitive Applications
- Wash Down Areas
- Corrosive Environments
-
