Standard Dimensions

12' W x 12' H

Standard Operating Speed

24 in/s

Operating Type

Gear driven, push-pull movement

Side Guide

Made of structural channels of 3 1/8" x 1 5/8" x 1/8" in galvanized steel.

Inner Side Guide

Polyethylene (PE-UHMW 1000); outer section 1/2" x 13/16", fixed at the base of the structural channels with springs. This means that the door curtain is stretched between its side guides.

Drum

In steel, diameter 4" x 0.078", shafts in steel.

Door Curtain

Reinforced PVC (27 oz/sq.yd). Available in different colors and provided with side sealing zippers; soft bottom edge design.

Motor

1/2 HP-60 Hz continuous industrial motor. (HP may vary with door size)

Motor Cover

Optional

Control Circuit

Electronic control board with 5V logic. Options included: B2, E2 wiring, timer to close, mid-stop, delay on reverse, maximum run timer.

Operator

Manufactured by MANARAS: Opera-H-Jackshaft Operator with industrial duty motor for up to 25 cycles/hour or 100 cycles/day. Electronic control board supplied with floor level disconnect for manual operation.

Detectors

An infrared photocell, detecting the presence of a pedestrian or a vehicle, immediately opens the door and keeps it open as long as the presence is detected. Height of the photocell: 12” from the floor (optionally up to maximum 24” upon request). A bottom edge detector opens the door when it hits an obstacle during the closing cycle. This detector is positioned in the bottom part of the curtain.

Power Supply

Standard: 115 VAC. Optional single phase 208-230 VAC, three phase 208 VAC, three phase 460 VAC, three phase 575 VAC. Frequency: 60 Hz. Circuit protection to be provided by the customer: 8A for 115/1/60, 4A for 230/1/60, 2.1A for 208/3/60, 1A for 460/3/60, 0.8A for 575/3/60.

Space Requirements

All indicated dimensions are net: the additional space necessary for mounting and maintenance has to be taken into account. Reduced dimensions upon request.