Features

• 24V class 2 control circuit with 40VA transformer to protect against short circuit
• External radio control terminal strip
• Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly
• Three button open-close-stop control station Nema-1
• Continuous duty industrial motor with external reset overload protection (1-phase)or external thermal overload relay motor protection(3-phase)
• Motor removable without affecting limit settings
• Heavy duty worm gear reduction in oil bath gearbox
• 1-1/4" or 1-3/8" cast iron flanged bearings on gearbox final output shaft
• Rigid steel wall mounting frame around gearbox
• 1.5 second time delay on all open functions standard on 1.5, 2 and 3 HP
• Solenoid brake standard
• #50 roller chain and sprockets on final drive
• Emergency chain hoist with electrical cut-out switch for manual operation
• Chain keeper
• Universal left or right hand mounting
• Baked on dark grey coat finish
• Shipping weight: 125 lbs

Circuit options

1 (M)

• Heavy duty reversing contactor with mechanical and electrical interlock incorporating the UL325(2010)interface module.
• C2 factory wiring standard(constant pressure close),B2 wiring can be field set by moving 1 jumper and installing Micanan monitored fail safe photo-eyes (supplied) or (optional) Micanan compatible monitored fail safe electric edge

2 (E)

• Full fonction Smart 10.0 Logic conrol board featuring on-board receiver with antenna, enhanced program selection to include B2,C2, D1, E2, T & TS and supplied with Micanan monitored fail safe photo-cells or (optional) Micanan monitored fail safe electric edge.
• D1 factory pre-set mode of operation standard (constant pressure open and close)

3

• Heavy duty reversing contactor with mechanical and electrical interlock. (Not available in US or other areas where UL325 (2010) is mandated)
• C2 factory wiring standard, B2 wiring can be field set by moving 1 jumper. Provisions for standard reversing devices.