Jackshaft Commercial Garage Door Operator Micanan Pro-LH

Limited duty belt drive jackshaft operator for high lift, vertical lift sectional doors and small rolling doors and grilles.



  • 24V class 2 control circuit with 40VA transformer to protect against short circuit
  • External radio control terminal strip
  • Low friction powder metal limit cam nuts with fully adjustable rotary type
    limit switch assembly
  • Three button open-close-stop control station Nema-1
  • 1/2 HP high starting torque, instant reversible motor protected by internal
    automatic thermal overload device
  • Heavy duty 4LV-belt
  • #41 roller chain and sprockets on all internal drives
  • Adjustable friction clutch
  • 3/4″ permanently lubricated and sealed ball bearings on pulley shaft
  • 1″ permanently lubricated and sealed bearings on final drive shaft
  • Solenoid brake standard
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Chain keeper
  • #41 roller chain and sprockets on final drive
  • Left or right hand mounting(must specify at time of order)
  • Baked on dark grey coat finish
  • Shipping wight 70 lbs
Circuit options

Circuit options

1 (M)

  • Heavy duty reversing contactor with mechanical and electrical interlock incorporating the UL325(2010)interface module.
  • C2 factory wiring standard(constant pressure close),B2 wiring can be field set by moving 1 jumper and installing Micanan monitored fail safe photo-eyes (supplied) or (optional) Micanan compatible monitored fail safe electric edge


  • Heavy duty relays(Not available in US or other areas where UL325 (2010)
    is mandated)
  • C2 factory wiring standard(constant pressure close), B2 wiring can be field
    set by moving 1 jumper.Provisions for standard reversing devices.
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.